How To Install Cabinet Face Frames, Filler Strips and Scribes with the Lamello P System
Hey, I’m Keith from Keith Johnson Custom Woodworking, and today we’re on-site doing an installation of a 15-foot built-in. We’ve got painted cabinets below, rift sawn white oak cabinets going above. We have the first run of cabinets in, but we need to scribe our filler strips. Now, this is all pre-finished material, so using…
Read More
How to Build a Waterfall Edge Table
Transcript:This is Chris from Lamello. In this video, we’re gonna show you how to clamp waterfall countertop edges or thick mitered material. We’ve shown you in other videos how you can clamp together a three-quarter material—it’s very easy, it’s a one-step process. Here, we don’t want to make one line of connectors across the middle…
Read More
How to Change the Cutter on Your Lamello Zeta P2
Transcript:Hello, in this video we’re going to show you how to change the cutter on your Lamello Zeta P2 or Zeta P2 cordless. Before you do anything with the Zeta, whether you’re taking the base plate off the machine or performing maintenance, always make sure to unplug the machine. Basic safety 101. Just as a…
Read More
How to use Lamello Zeta P2 with a CNC router
Video Transcript: Hey guys, how’s it going? Dan Dempsey with Lamello USA. Today we’re with Josh from Innovative Integrations. He’s showing us a really cool cash wrap project he recently completed with the Lamello Flexus. It’s our newest Clamex connector. He’s going to walk us through what he did and why he did it, and…
Read More
Cutter Differences – Carbide vs. Diamond
Video Transcript: Hey everyone, this is Chris, the U.S. Product Manager for Lamello. I want to give you a brief explanation of the differences between the carbide cutters and diamond cutters, the P-System cutter used with the Zeta P2, and why you might choose one over the other. It’s easy to tell them apart at…
Read More