False Drawer Fronts with Tenso P-14

Set Zeta P2 to the 14mm depth setting for Tenso P-14 connectors on the back side of the drawer face

Use stop square to create an outside reference fence

Run 14mm deep P-System slots on back of drawer face

Insert male Tenso P-14 halves into back side of drawer face

Set Zeta P2 to the 10mm depth setting for the Tenso P-14 connectors on the false front backer

Use double-sided tape and shim stock equal to the gap around drawer face

Run 10mm deep P-System slots into false front backer, corresponding to those on drawer face

Female Tenso P-14 halves project from backer surface, which equals the gap behind door/drawer faces

Install drawer face